DC SUPER FLEX - Dia. 75-150mm - 3”-6”

Product Numbers: 

DC SUPER FLEX - Dia. 75-150mm - 3”-6”

050700 DC SUPER FLEX 25M 

050750 DC SUPER FLEX 50M 

050717 Extension cable 6M 

050723 Extension cable 15M 

050716 DC SUPER FLEX centering tool w/brushes 

050726 DC SUPER FLEX centering tool Dia. 150 mm 

050345 Hanging clamps 

F80867 Complete electrical supply line 5M Control unit


DC SUPER FLEX is DANCUTTER’s powerful cutter for cutting, milling and grinding pipes 75–150 mm diameter, regardless of material and regardless of whether the pipe is straight or has bends.

DC SUPER FLEX is a flexible, advanced cutter, developed and refined by DANCUTTER and focused on reliability, simplicity and saving time for our customers. The cutter can be operated by just one person who easily sets up the cutter in a few minutes, does the work, and quickly moves on to the next task.

We take pride in developing systems to meet the exact needs of our customers. If you have a special requirement, don’t hesitate to contact us, as we can surely find a solution for you, too.


SET-UP

DC SUPER FLEX takes a few minutes to set up: the wheeled stainless-steel frame – holding the supply hoses, control unit and cutter – is driven up to the work site. The cutter is all ready connected to the supply hose, and air and power are connected to the system. The cutter is inserted into the pipe up to its working position. The hose has a reach of 25 or 50 metres.


OPERATION

DC SUPER FLEX is easy to operate using the two joysticks on the frame-mounted control unit. A 12.1” colour display is built into the control unit’s lid, providing a sharp, precise image of the cutter’s position. The milling motor’s rotation and functions – such as raising, lowering and running back and forth – are operated from the control unit.

An automatic feeder and slip ring are built into the frame so the supply hose can be smoothly moved back and forth during the work. 

Image-empty-state.png

© 2020 Paramount Pipe Lining Products LLC | United States of America