top of page

DC MAXI FLEX - Dia. 100-300mm - 4”-12”

Product Numbers: 

DC MAXI FLEX - Dia. 100-300mm - 4”-12”

080770 DC MAXI FLEX 70M 

050717 Extension cable 6M 

050723 Extension cable 15M 

080550 DC MAXI FLEX centering tool Dia. 300 mm 

F80867 Complete electrical supply line 5M Control unit

DC MAXI FLEX is DANCUTTER’s powerful cutter for cutting, milling and grinding pipes from 100–300 mm diameter, regardless of material and regardless of whether the pipe is straight or has bends.

DC MAXI FLEX is a flexible, advanced cutter, developed and refined by DANCUTTER and focused on reliability, simplicity and saving time for our customers. The cutter can be operated by just one person who easily sets up the cutter in a few minutes, does the work, and quickly moves on to the next task.

The cutters are 100% Made in Denmark and, at DANCUTTER, we take pride in developing systems to meet the exact needs of our customers. If you have a special requirement, don’t hesitate to contact DANCUTTER, as we can surely find a solution for you, too.


DC MAXI FLEX takes a few minutes to set up: the wheeled stainless-steel frame – holding the supply hoses, control unitand cutter – is driven up to the work site. The cutter is connected to the supply hose, and air and power are connected to the system. The cutter is inserted into the pipe up to its working position. The hose has a reach of up to 70 metres.


DC MAXI FLEX is easy to operate using the two joystick on the frame-mounted control unit. A 12.1” colour display is built into the control unit’s lid, providing a sharp, precise image of the cutter’s position. The milling motor’s rotation and functions – such as raising, lowering and running back and forth – are operated from

the control panel.

An automatic feeder and slip ring are built into the frame so the supply hose can be smoothly moved back and forth during the work. The cutter is also equipped with a built-in slip ring which enables 

bottom of page